The CNC Machine is mainly used to engrave and cut the granite, marble, grit stone, tombstone, etc.
The machine body is made of thick welded steel tubes which have gone through strict tempering and stress relief treatment, not easy to deflect, very strong and stable.
1. Using DSP Controller, Stepper or Servo Motor and Driver, Water cooling spindle, Taiwan Delta Inverter, Taiwan Hiwin Linear Rails.
2. With T-slot table and water slot, can use clamps to fix the material.
3. All the axis of the transmission are used with dust cover which can effectively prevent the material debris.
Application for granite, marble, grit stone, tombstone engraving.
|X,Y,Z Working Area||1300x2500x200mm|
|X,Y,Z Traveling Positioning Accuracy||±0.03/300mm|
|X,Y,Z Re-positioning Accuracy||±0.03mm|
|Table Surface||T-slot with water slot|
|X, Y Structure||Rack and Pinion, Hiwin Linear Rail|
|Z Structure||Hiwin Rail Linear and Ball Screw|
|Max. Power Consumption||(Without Spindle) 3.5Kw|
|Max. Rapid Travel Rate||40000mm/min|
|Max. Working Speed||30000mm/min|
|Drive Motors||Big step motor|
|Working Voltage||380V, 3phase|
|Command Language||G Code|
|Operating System||DSP System|
|Flash Memory||512M(U Disk)|
|Software Compatibility||Artcam Software|
|Running Environment Temperature||0 - 45 Centigrade|
|Relative Humidity||30% - 75%|
PS: All the working area and specifications can be customized according to your requests.