Please keep the processing time of the CNC machine in 12 hours per day.
For the water cooling spindle, please ensure the cooling water cleaning and the water pump works well, absolutely do not appear of the water shortage phenomenon. Also please replace the cooling water regularly in order to prevent the high temperature in the circulatory system.
Be sure to clean up the dust on the table and the transmission system after use it for each time.
It is better to lubricate the transmission system weekly even if there have the lubrication system on the machine.
The machine should be lubricated and moved to ensure the flexibility of the transmission if not using it for a long time.
Cleaning the dust in the cabinet and check the connection between the screws and the terminals whether they are loosening, especially the power supply.
For the Automatic Tool Change machine, the tool magazine should be checked every month to ensure the machine working well.
Check the fans in the cabinet every day to ensure the electric parts working well within the high temperature.
Please prevent the water and oil into the inverter.